محصولات > پایرونیکس - Pyronix > آشکارسازهای حرکتی > KX15 DTAM

 

KX15DTAM                  
قابليت ها :
 
 
. سنسور دو گانه براساس عملكرد حرارت الكتريكي
. پوشش محدوده رديابي 18 تا 30 متر
. آشكار سازي پوشش ايجاد شده Antimask
. قابليت برنامه ريزي براي آشكار سازي پوشش ايجاد شده بين صفر تا 1 متر
. مقاومت انتهاي خط
. تكنولوژي امواج آبي
. قابليت حساسيت خودكار
. تعديل دماي ديجيتال
. نشانگر LED سه وضعیتی
. مجهز به پايه هاي سقفي و ديواري
. جنس بدنه از پلاستيك تقويت شده ABS
 
KX15DTAM(Grade 3)
 
Digital Combined PIR, Microwave and Anti Mask Detector
  • Dual element pyro-electric sensor
  • X-band DRO based microwave
  • optional lenses 18m and 30m
  • Anti-masking detection
  • 0-1m Adjustable mask detection
  • Selectable EOL (End Of Line) resistors
  • AND/OR technology
  • Patented Independent Floating Thresholds (IFT)
  • Blue wave technology
  • Auto sensitivity feature
  • Digital temperature compensation
  • Triple LED indication
  • Frequency options
  • Sealed optics
  • Tamper proof brackets included
  • ABS plastics
  • Tested and Certified to EN 50131-2-4
 
COMMERCIAL / RESIDENTIAL

 

  Product Features  
 
Features Description
15m Volumetric detector 15m Volumetric detection coverage. Ideal for protection of rooms, offices etc.
18m Vertical curtain detector 18m Vertical curtain detection coverage. Ideal for protection of large windows areas
30m Long range detector 30m long range detection coverage. Ideal for long narrow areas or corridors
Anti-masking detection Ideal in high security environments where there may be a significant risk of masking. An area immediately in front of the detector is monitored continuously and separately from its normal mode. Any intrusion into this quiet area activates the anti-masking process. It also has separate mask and trouble output.
Independent mask relay In the event of one of the technologies being masked, the KX15DTAM will go into a mask fault condition. The mask relay will open. This can be connected to the 24hr zone of a control panel
Selectable EOL resistors The detectors incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.
AND/OR technology AND’ mode operates as a standard dual technology detector. ‘OR’ mode will switch to microwave detection in environments where there is a risk of PIR detection being blocked,
Blue wave technology This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components: 1). The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. 2). Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.
Auto sensitivity feature Depending on the environment condition, the detector will automatically adjust the sensitivity
Digital Temperature Compensation When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC)
Active self test If there is no activation after a 5 hour period it will actually self test both the PIR and microwave
Triple LED indication Microwave - orange, PIR - green, alarm - blue. (KX15DTAM - Blue flashing = mask)
Microwave Frequencies Bands 3 different frequency bands to avoid interference between detectors are installed in the same room
 
  Lens Coverage  
 

 
  Technical Specification  
 
ELECTRICAL
Operating voltage 9-16VDC (12V nominal)
Current consumption - no alarm 23mA
Current consumption - alarm 30mA
Relay Solid state
Relay output 60VDC, 50mA Protected
Tamper switch 12V max, 50mA max
RFI immunity to continuous wave (CW) 80-2000MHz 75 V/m
RFI immunity to amplitude modulation (AM) 80-2000MHz 25 V/m
RFI immunity to pulse modulation (PM) 80-2000MHz 25 V/m
DTI approved frequenices 10.680, 10.687, 10.695GHz
FCC approved frequencies 10.515, 10.525, 10.535GHz
PIT approved frequencies 9.87, 9.90, 9.91GHz
PHYSICAL
Dimensions 117x69x50mm
Weight 105g
OPERATING FEATURES
Alarm period of 2.5 seconds
Detection speed 0.3 - 3m/s
Operating temperature -30
Storage temperature -40

 

OPTICAL
White light filter 6500 Lux
Optics Sealed
Lens 3 Dimensional
Protection Ultraviolet Light Filter
MOUNTING
Optimum coverage height (dual Tech) 1.8-2.4m
Optimum coverage height (vertical curtain) 1.8-4.0m
Optimum coverage height (long range) 1.8-2.4m

 

 

 

 
  Information  
 
COMPLIANCE (click image to download certificate)
Belgium  
CE  
China  
Denmark  
EN Europe  
Finland  
Netherlands  
Norway  
Russia  
PACKING INFORMATION
Min Pack 10
Warranty 5 years
Designed UK
 
  Downloads  
 

 

   

 

Marketing Literature
 
 
 

 

 
     
 
   

   آدرس : مشهد- خیابان آبکوه ،تربیت شمالی 5 ،مجتمع تجاری سعد آباد-واحد 104و101
تلفن :7296162-
0513

 

  
                              

 

 

 

کليه حقوق اين وب سايت محفوظ و متعلق به مي باشد
Copyright © 2013 - All rights reserved
طراحي سايت و بهينه سازي وب سايت توسط پورتال فراتک